A new RV can look ready for the road long before it has been thoroughly checked. That is why understanding what PDI covers matters before you sign the final paperwork, accept the keys, and head toward your first campground. A pre-delivery inspection is the dealer’s opportunity to find and correct problems before the RV becomes your problem.
A proper PDI is more than a quick walk-around, a wash, and a handshake. It should be a working inspection of the coach, its major systems, and the equipment you paid for. It also gives you a chance to see how everything operates while someone is available to answer questions and document anything that still needs attention.
What PDI Covers on a New RV
PDI stands for pre-delivery inspection. In the RV world, it generally refers to the inspection and preparation completed before a new or recently sold unit is handed over to the buyer. The scope can vary by dealer, manufacturer, RV type, and whether the unit has been sitting on a lot, transported a long distance, or had dealer-installed options added.
At its best, the process verifies that the RV is safe, functional, clean, and equipped as promised. It should identify shipping damage, missed factory defects, loose connections, leaks, incomplete installations, and components that do not operate correctly.
The dealer may perform part of the inspection before your arrival, then walk through the RV with you on delivery day. Do not confuse that customer orientation with the full inspection itself. A walkthrough teaches you how to use the RV. The PDI is meant to catch issues before you are trying to learn your new rig in a campground with a reservation clock running.
Exterior, roof, and entry checks
The outside of an RV takes the brunt of weather, road vibration, and transport damage. A PDI should include a close look at the sidewalls, front cap, rear wall, slide-out exterior, windows, storage doors, awnings, steps, ladder, lights, and trim.
Roof condition deserves real attention. The inspector should check roof material, seams, sealant, vents, skylights, air conditioner mounting points, antennas, and any solar equipment. A small gap in sealant can turn into a water intrusion problem that is expensive and frustrating to trace later.
Entry doors and baggage doors should latch correctly, lock securely, and seal against water. Power steps should extend and retract without binding. Leveling jacks, stabilizers, hitch equipment, safety chains, breakaway switch components, and tow wiring should also be checked where applicable.
Plumbing and water systems
A dry plumbing test is not enough. To truly inspect the system, the RV should be connected to water or have its fresh tank filled so faucets, toilets, showers, outside showers, water pumps, and tank sensors can be tested under normal use.
The inspector should look for leaks under sinks, around the toilet, behind access panels, near the water heater, and in the service bay. They should confirm that both hot and cold water work, the pump cycles properly, drains flow, and the city-water connection does not drip.
If your RV has a tankless water heater, winterizing valves, filtration equipment, washer hookups, or an outdoor kitchen, those features need individual testing too. Features that are never run during delivery are often the ones that surprise owners later.
Electrical, battery, and generator operation
Your RV has more than one electrical system, and each needs attention. The PDI should verify shore power operation, battery charging, 12-volt lighting, outlets, GFCI protection, converter or inverter function, breaker panels, and battery disconnects.
The RV should be tested on more than one power source when practical. A system that works on shore power may reveal a problem when operating on battery power, inverter power, or generator power. If the coach includes solar, its charge controller and monitor should be checked as well.
A generator should be started, allowed to carry a load, and checked for proper output. That means testing it with meaningful equipment operating, such as air conditioning or the microwave, not simply pressing the start button for a few seconds. For RVers who rely on a generator while boondocking, traveling through Florida heat, or stopping overnight between destinations, this is not a minor detail.
Appliances, HVAC, and interior equipment
A PDI should confirm that every installed appliance works on its intended fuel or power source. This includes the refrigerator, stove, oven, microwave, range hood, water heater, furnace, air conditioners, ceiling fans, televisions, stereos, and any built-in electronics.
Air conditioning should run long enough to show that it is actually cooling. The furnace should ignite and blow warm air. Refrigerators may need time to reach temperature, so ask whether the dealer has had it running before your appointment and how they confirmed operation.
Inside the RV, look beyond the glossy surfaces. Open every cabinet and drawer. Test every blind, shade, vent fan, light switch, USB outlet, slide-out, bed lift, and reclining seat. Inspect flooring, furniture, trim, countertops, wall panels, and ceiling areas for damage or signs of moisture.
Slide-outs need special care because they involve structure, seals, motors, and electrical components. Run each slide fully in and out. Listen for unusual noises, watch for alignment problems, and inspect the seals from both inside and outside.
Safety Equipment Should Be Part of the PDI
Safety checks are not optional just because the RV is new. Carbon monoxide, smoke, propane, and fire safety equipment should be present, properly mounted, and tested. Emergency exit windows should open as designed. Fire extinguishers should be charged and accessible.
The PDI should also include exterior running lights, brake lights, turn signals, hazard lights, headlights on motorized RVs, rear cameras, mirrors, windshield wipers, horns, and dash warning lights. For towable units, confirm the brake controller connection and breakaway system work correctly before leaving the lot.
Tires deserve a close look as well. Check tire condition, size, load rating, date codes, and inflation recommendations. A new RV may have new-looking tires that have spent time in storage or have an unsuitable pressure setting for its actual loaded weight.
Road Testing and Chassis Items
For motorhomes, a road test can reveal issues that are invisible when the unit is parked. The vehicle should track straight, brake properly, shift normally, and operate without abnormal vibration, steering pull, rattles, or warning lights. Cruise control, cameras, dash air conditioning, gauges, and driver controls should be checked during the drive.
Not every dealer performs a lengthy road test with the customer present, and some situations make that impractical. Still, ask whether it was driven, who performed the test, and whether any concerns were found. For a towable RV, ask about axle, suspension, brake, wheel-bearing, and hitch inspection instead.
If you are buying a used RV, a dealer PDI is useful but may not replace an independent pre-purchase inspection. Older units can have hidden moisture damage, aging appliances, previous repairs, or chassis issues that need a deeper evaluation. The right level of inspection depends on the RV’s age, condition, price, and how far you plan to travel.
How to Protect Yourself on Delivery Day
Give yourself enough time. Rushing through delivery because you have a campground reservation, a long drive home, or family waiting is how small concerns get overlooked. Plan to spend several hours at the dealership if needed.
Bring a notebook, take photos or videos, and operate the systems yourself while someone explains them. If something does not work correctly, do not rely on a verbal promise that it will be handled later. Ask for the concern to be written on a due bill, repair order, or delivery document with a clear next step.
It also helps to ask for manuals, appliance information, warranty details, keys, remotes, tank capacities, recommended tire pressures, and instructions for winterizing and de-winterizing. Confirm what warranty work the selling dealer will handle, what requires manufacturer approval, and who to call if an issue appears shortly after pickup.
At True Test RV, we know a missed issue can disrupt much more than a weekend trip. It can delay a seasonal departure, strand a full-time RVer, or turn a long-planned family getaway into a repair search. If you need help evaluating an RV concern, completing repairs, or getting systems ready for the road, getting answers early is always easier than dealing with a breakdown later.
A careful PDI does not guarantee that an RV will never need service. It does give you a fair chance to start ownership with systems tested, questions answered, and any known problems documented. Before you roll out, take the extra time to turn every switch, open every valve, run every appliance, and make sure your RV is ready to carry you down the highway.